CSM-series, manifold cylinders

  • Compact fixture-integrated positioning and holding
  • Design eliminates the need for fittings and tubing, minimizing space requirements and facilitating easy removal of chips and dirt
  • Minimal cylinder height relative to the plunger stroke enables extremely compact fixture designs
  • Cylinder body is fully recessed within the fixture allowing the workpiece to be positioned near-flush with the fixture surface, saving space
  • Nitro carburized bodies and internal plunger wipers allow maintenance-free, high cycle performance
  • Center-tapped plungers will hold workpiece contact buttons
  • Single-acting design with spring return simplifies hydraulic requirements

 

Cylinder Capacity Stroke Model
Number		 Effective Area Oil 
Capacity		 Collapsed Height Outside Diameter
pound   in2 in3 inch inch
380 0.28 CSM-271 0.08 0.02 1.33 .536-18 UN
380 0.51 CSM-2131 0.08 0.04 1.71 .563-18 UN
1190 0.28 CSM-571 0.24 0.07 1.74 .875-14 UN
1190 0.51 CSM-5131 0.24 0.12 2.07 .875-14 UN
2590 0.28 CSM-1071 0.50 0.14 1.87 1.062-12 UN
2590 0.51 CSM-10131 0.50 0.26 2.14 1.062-12 UN
2590 0.75 CSM-10191 0.50 0.38 2.75 1.062-12 UN
3900 0.51 CSM-18131 0.79 0.40 2.36 1.312-12 UN
3900 0.98 CSM-18251 0.79 0.77 3.13 1.312-12 UN
6110 0.59 CSM-27151 1.22 0.72 2.54 1.625-12 UN
6110 0.98 CSM-27251 1.22 1.20 3.27 1.625-12 UN

Note: Seal  material: Buna-N, Polyurethane.