SU-series, upper flange models swing cylinders

  • Minimal mounting height when space is at a premium
  • Flexible design allows for manifold or threaded port connection
  • Low profile mounting style allows body to be below mounting surface
  • Simple mounting preparation and easy installation – 3 or 4 mounting bolts
  • Easy to machine fixture hole – does not require tight tolerances
  • Double oil connection – threaded port or manifold mount
  • Symmetrical rectangular flange design enables clamping at three sides of the cylinder.

 

Clamp
Force 1)

pound		 Stroke
inch		 Left 2)
Turning
Model
Number		 Right 2)
Turning
Model
Number		 Cyl.
Type		 Effective
Area
inch2		 Max.
Oil
Flow 1)
in3/min		 Clamp
Arms 1)
Stan-
dard		 Long
Clamp Total S/A D/A Clamp Uncl.
475 0.32 0.65 SULS-21 SURS-21 • – 0.12 – 12 CAS-21 CAL-21
1100 0.39 0.89 SULS-51 SURS-51 • – 0.28 – 25 CAS-51 CAL-51
1800 0.47 0.87 SULS-92 SURS-92 • – 0.49 – 60 CAS-92 CAL-92
2400 0.5 1.12 SULS-121 SURS-121 • – 0.63 – 100 CAS-121 CAL-121
3900 0.55 1.10 SULS-201 SURS-201 • – 1.10 – 140 CAS-201 CAL-201
7450 0.63 1.18 SULS-351 SURS-351 • – 1.92 – 240 CAS-351 CAL-351
500 0.32 0.65 SULD-21 SURD-21 – • 0.12 0.24 12 CAS-21 CAL-21
1250 0.39 0.89 SULD-51 SURD-51 – • 0.28 0.59 25 CAS-51 CAL-51
2025 0.47 0.87 SULD-92 SURD-92 – • 0.49 1.25 60 CAS-92 CAL-92
2025 1.26 1.65 SULDL-92* SURDL-92* – • 0.49 1.25 60 CAS-92 CAL-92
2600 0.5 1.12 SULD-121 SURD-121 – • 0.63 1.23 100 CAS-121 CAL-121
2600 1.25 1.87 SULDL-121 SURDL-121 – • 0.63 1.23 100 CAS-121 CAL-121
4200 0.55 1.10 SULD-201 SURD-201 – • 1.10 2.35 140 CAS-201 CAL-201
7600 0.63 1.18 SULD-351 SURD-351 – • 1.92 3.68 240 CAS-351 CAL-351
7600 1.25 1.83 SULDL-351* SURDL-351* – • 1.92 3.68 240 CAS-351 CAL-351

1) Clamp force with standard clamp arm. Clamp arms are sold separately.
Clamp forces for single-acting models are reduced in order to overcome return spring force.
2) For models with straight plunger movement, replace L or R with S. Example: SUSD-92.
* This product is made to order. Contact Enerpac for delivery information before specifying in your design.