SL-Series, Lower Flange Model Swing Cylinders

Enerpac lower flange model swing cylinders do not require a fixture hole – cylinder can be bolted directly to fixture
Flexible design allows for manifold or threaded port connection
No fixture hole preparation required
Easiest mounting preparation in the swing cylinder line
Symmetrical rectangular flange design enables hydraulic clamping at three sides of the workholding cylinder
Allows extra large parts to be clamped
30, 45 and 60 degree swing angles available on request

Clamp Force ¹⁾	Stroke		Left * Turning Model Number	Right * Turning Model Number	Cyl. Type		Effective Area		Max. Oil Flow ¹⁾	Clamp Arms ¹⁾
pound	inch				Cyl. Type		inch²		in3/min	Clamp Arms ¹⁾
pound	Clamp	Total			S/A	D/A	Clamp	Unclamp	in3/min	Standard	Long
475	0.32	0.65	SLLS-21	SLRS-21	•	–	0.12	–	12	CAS-21	CAL-22
1100	0.39	0.89	SLLS-51	SLRS-51	•	–	0.28	–	25	CAS-51	CAL-52
1800	0.47	0.90	SLLS-92	SLRS-92	•	–	0.49	–	60	CAS-92	CAL-92
2400	0.50	1.10	SLLS-121	SLRS-121	•	–	0.63	–	100	CAS-121	CAL-122
3900	0.55	1.16	SLLS-201	SLRS-201	•	–	1.10	–	140	CAS-201	CAL-202
7450	0.63	1.28	SLLS-351	SLRS-351	•	–	1.92	–	240	CAS-351	CAL-352
500	0.32	0.65	SLLD-21	SLRD-21	–	•	0.12	0.24	12	CAS-21	CAL-22
1250	0.39	0.89	SLLD-51	SLRD-51	–	•	0.28	0.59	25	CAS-51	CAL-52
2025	0.47	0.90	SLLD-92	SLRD-92	–	•	0.49	1.25	60	CAS-92	CAL-92
2600	0.50	1.10	SLLD-121	SLRD-121	–	•	0.63	1.23	100	CAS-121	CAL-122
4200	0.55	1.16	SLLD-201	SLRD-201	–	•	1.10	2.35	140	CAS-201	CAL-202
7600	0.63	1.28	SLLD-351	SLRD-351	–	•	1.92	3.68	240	CAS-351	CAL-352

1) Clamp force with standard clamp arm. Clamp arms are sold separately.
Clamp forces for single-acting models are reduced in order to overcome return spring force.
* For models with straight plunger movement, replace L or R with S. Example: SLSD-92.