Synchronous Hoist Systems
The SHS-Series SyncHoist system is a below-the-hook sling adjuster (hydraulic turnbuckle) which is typically comprised of multiple specialized hydraulic cylinder and valve combinations mounted directly in-line with the rigging which provides an operator the freedom to precisely monitor and adjust each lifting point independently. The use of integrated cylinder stroke sensors and pressure transducers at each lifting point allow for position and load feedback at the operator control station. PLC controls deliver operator safety while the intelligent hydraulics monitor and guide the compact hydraulic cylinders.
Accurate hoisting and load positioning enhance the capability of a single crane. With the use of a single crane, the load can be precisely maneuvered in a vertical and horizontal plane. Utilizing a single crane reduces risk and cost, and vastly improves operating speed and worker safety. A single crane also reduces the risk of damage from oscillations of wire rope due to sudden crane starts/stops.
The synchronous hoist system can be used for pre-programmed positioning, tilting, aligning and high precision horizontal and vertical load positioning.
3 ph - 50 Hz
|Number of Pump Outlets
and Oil Flow2)
|ton (kN)||ton (kN)||(mm)||(kw)||(l/min)||(kg)3)|
|4 x 55
|500||Manual||7,5||4 x 1,4||450|
|500||Automatic||15||4 x 2,1||450|
|4 x 85
|500||Manual||11||4 x 2,1||500|
|500||Automatic||15||4 x 2,1||500|
|4 x 110
|1000||Manual||11||4 x 2,1||970|
|1000||Automatic||15||4 x 2,1||970|
1) With 4 cylinders and one 400 VAC-3 phase-50 Hz Powerpack (suffix W). For 460-480 VAC-3 phase-60 Hz Powerpack change suffix W into J. Example: SHS 4 5560 MJ.
2) Pump and cylinders include 4x 25 meters hydraulic hoses with couplers.
3) Weight per cylinder
SyncHoist System Assists in the Placement of Nuclear Plant Module Measuring 70 Feet Tall by 80 Feet Wide and Weighing 1,140 Tons
The SyncHoist System, consisting of an 800 metric ton cylinder and two 400 metric ton cylinders, allowed operators to monitor and adjust each lifting point independently or together, in a synchronized manner.
Installing Pylon Sections of a Cable-Stayed Bridge with a SyncHoist
Attached below the hook of a 350 ton mobile crane, the SyncHoist system positioned pylon sections weighing between 90 to 130 tons - safely and with precise accuracy.
SyncHoist Lifts and Positions Brisbane Riverwalk Concrete Girders
Using SyncHoist technology Universal Cranes is able to safely control irregularly shaped and uneven loads weighing up to hundreds of tons.
Precision Positioning of 600 ton Ship Components
With only a single floating derrick available, the SyncHoist system enabled a single crane to position components of the naval ship while minimizing the stress applied during the lift.
Positioning the Roof Segments of the Palace of the Arts
The unique design of the Palace of the Arts Valencia, Spain required a hoisting solution capable of accurately positioning the roof segments. The SyncHoist system enabled a single crane to maneuver each roof segment in both a vertical and horizontal plane.