RSM, RCS-Series, Low Height Hydraulic Cylinders

RSM-Series, Flat-Jac® Cylinders

  • Compact hydraulic cylinder wtih a flat design for use where most other cylinders will not fit
  • Single-acting, spring return
  • RSM-750, 1000 and 1500 cylinders have handles for easy carrying
  • Mounting holes permit easy fixturing
  • Baked enamel finish for increased corrosion resistance
  • CR-400 coupler and dust cap included on all models1)
  • Hard chrome plated high quality steel plungers
  • Grooved plunger ends require no saddle.

RCS-Series, Low Height Cylinders

  • Lightweight, low profile cylinder design for use in confined spaces
  • Single-acting, spring return
  • Baked enamel finish for increased corrosion resistance
  • Plunger wiper reduces contamination, extending cylinder life
  • CR-400 coupler and dust cap included on all models
  • Grooved plunger end with threaded holes for mounting tilt saddles
  • Integral handle on RCS-1002 for easy carrying
  • Plated steel plungers.
Cylinder
Capacity
Stroke Model
Number
Cylinder
Effective Area
Oil
Capacity
Collapsed
Height
Extended
Height
Outside
Diameter
Weight
ton (kN) mm cm2 cm3 mm mm mm kg
5 (45) 6 RSM-501) 6,5 4 32 38 58 x 41 1
10 (101) 12 RSM-100 14,5 18 43 54 82 x 55 1,4
20 (201) 11 RSM-200 28,7 32 51 62 101 x 76 3,1
30 (295) 13 RSM-300 42,1 55 58 71 117 x 95 4,5
45 (435) 16 RSM-500 62,1 99 66 82 140 x 114 6,8
75 (718) 16 RSM-750 102,6 164 79 95 165 x 139 11,3
90 (887) 16 RSM-1000 126,7 203 85 101 178 x 153 14,5
150 (1368) 16 RSM-1500 198,1 317 100 116 215 x 190 26,3
10 (101) 38 RCS-101* 14,5 55 88 126 69 2,7
20 (201) 45 RCS-201* 28,7 129 98 143 92 5,0
30 (295) 62 RCS-302* 42,1 261 117 179 101 6,8
45 (435) 60 RCS-502* 62,1 373 122 182 124 10,0
90 (887) 57 RCS-1002* 126,7 722 141 198 165 20,7

1) RSM-50 is fitted with an AR-400 coupler. Available as set, see note on next page.
*Also available as cylinder-pump sets.

Cylinder
Capacity
Stroke Model Number Cylinder
Effective Area
Oil
Capacity
Collapsed
Height
Extended
Height
Outside
Dia.
Weight
ton (max) (in) (in2) (in3) (in) (in) (in) (lbs)
5 (4.9) .25 RSM-50 .99 .25 1.28 1.53 2.31 x 1.63 2.3
10 (11.2) .44 RSM-100 2.24 .98 1.69 2.13 3.25 x 2.19 3.1
20 (22.1) .44 RSM-200 4.43 1.94 2.03 2.47 4.00 x 3.00 6.8
30 (32.4) .50 RSM-300 6.49 3.25 2.31 2.81 4.63 x 3.75 10
50 (48.1) .63 RSM-500 9.62 6.01 2.63 3.25 5.50 x 4.50 15
75 (79.5) .63 RSM-750 15.90 9.94 3.13 3.75 6.50 x 5.50 25
100 (98.1) .63 RSM-1000 19.63 12.27 3.38 4.00 7.00 x 6.00 32
150 (153.4) .63 RSM-1500 30.68 19.17 3.94 4.56 8.50 x 7.50 58
10 (11.2) 1.5 RCS-101* 2.24 3.35 3.47 4.97 2.75 9
20 (22.1) 1.75 RCS-201* 4.43 7.75 3.88 5.63 3.63 11
30 (32.4) 2.44 RCS-302* 6.49 15.82 4.63 7.06 4.00 15
50 (48.1) 2.38 RCS-502* 9.62 22.85 4.81 7.19 4.88 24
100 (98.1) 2.25 RCS-1002* 19.63 44.18 5.56 7.81 6.50 50

Note: RSM-50 is fitted with an AR-400 coupler.
*Also available as cylinder-pump sets.

Repositioning of a Satellite Earth Station Antenna

Repositioning of a Satellite Earth Station Antenna
An RCS-Series low height cylinder placed at the antenna’s pintle post applied 3 tonnes of lateral force to slide the antenna, on Teflon bearing pads, back to center.

 

POWERFUL SOLUTIONS. GLOBAL FORCE.