ETW-Series, Electric Torque Wrenches

Your simple solution for smart bolting

Versatility

  • Patented firmware design provides accurate fastening on soft, hard, or pre-tightened joints
  • Single control box may be used to operate multiple wrench models
  • Wrenches and control boxes may be purchased separately or as a set

Performance

  • High speed continuous rotation gets the job done faster
  • Torque and angle functionality allows input of nominal torque value followed by a specific angle of rotation
  • Pass/Fail LED indicator on back of tool verifies fastening has been completed according to specified input

Simplicity

  • Control box with large seven-inch touchscreen simplifies tool operation
  • Controls on back of wrench enable operator to monitor and manage the fastening process without returning to the control box
  • Brightly lit three line LED display on wrench is easy to read in any environment, even in bright sunlight

Traceability

  • Fastening record can be viewed on-screen and transferred through standard USB connection on the control box
  • Each tool is performance tested and shipped complete with a factory calibration certificate

Safety

  • Lift points on wrench enable use with positioning handle or lifting device for greater handling safety
  • Ground fault detector protects operator in the event of insufficient grounding

Minimum Torque Nominal Torque Square Drive ETW Set
Model
Number
ETW Set Includes Voltage Speed Weight*
(Nm) (Ft.lbs) (Nm) (Ft.lbs) (inch) Wrench
Model No.**
Control Box
Model No.**
(RPM) (kg)
270 200 1355 1000 1 ETW1000B TW1000B ETWCB-B 115V 60 Hz 9,8 8,2
270 200 1355 1000 1 ETW1000I TW1000EI ETWCB-I 230V 60 Hz 15,2 8,2
270 200 1355 1000 1 ETW1000E TW1000EI ETWCB-I 230V 50 Hz 15,2 8,2
540 400 2710 2000 1 ETW2000B TW2000B ETWCB-B 115V 60 Hz 5,8 8,9
540 400 2710 2000 1 ETW2000I TW2000EI ETWCB-I 230V 60 Hz 9,0 8,9
540 400 2710 2000 1 ETW2000E TW2000EI ETWCB-E 230V 50 Hz 9,0 8,9
810 600 4065 3000 1 ETW3000B TW3000B ETWCB-B 115V 60 Hz 2,8 11,9
810 600 4065 3000 1 ETW3000I TW3000EI ETWCB-I 230V 60 Hz 4,3 11,9
810 600 4065 3000 1 ETW3000E TW3000EI ETWCB-E 230V 50 Hz 4,3 11,9
1625 1200 8135 6000 1 1/2 ETW6000B TW6000B ETWCB-B 115V 60 Hz 1,9 19,1
1625 1200 8135 6000 1 1/2 ETW6000I TW6000EI ETWCB-I 230V 60 Hz 2,9 19,1
1625 1200 8135 6000 1 1/2 ETW6000E TW6000EI ETWCB-E 230V 50 Hz 2,9 19,1

* Weight does not include reaction arm. Standard eaction arm weight for ETW1000, ETW2000, ETW3000 is 1,3 kg and for ETW6000 is 3,5 kg. Weight of the control box is 9 kg.
** Use of ETW requires both wrench and control box. These may be purchased separately, or as a calibrated set.

Voltage: (Model No. ending with suffix)
B = 115V, 60 Hz
I = 230V, 60 Hz (with NEMA 6-15 plug)
E = 230V, 50 Hz (with commonly used European (SCHUKO) plug)

Minimum Torque Nominal Torque Square Drive ETW Set
Model
Number
ETW Set Includes Voltage Nominal
Speed
RPMs
Wrench
Weight*
(Ft.lbs) (Nm) (Ft.lbs) (Nm) (in) Wrench
Model No.**
Control Box
Model No.**
(lbs)
200 270 1000 1355 1.0 ETW1000B TW1000B ETWCB-B 115V 60 Hz 9.8 18.1
200 270 1000 1355 1.0 ETW1000I TW1000EI ETWCB-I 230V 60 Hz 15.2 18.1
200 270 1000 1355 1.0 ETW1000E TW1000EI ETWCB-E 230V 50 Hz 15.2 18.1
400 540 2000 2710 1.0 ETW2000B TW2000B ETWCB-B 115V 60 Hz 5.8 19.7
400 540 2000 2710 1.0 ETW2000I TW2000EI ETWCB-I 230V 60 Hz 9.0 19.7
400 540 2000 2710 1.0 ETW2000E TW2000EI ETWCB-E 230V 50 Hz 9.0 19.7
600 810 3000 4065 1.0 ETW3000B TW3000B ETWCB-B 115V 60 Hz 2.8 26.3
600 810 3000 4065 1.0 ETW3000I TW3000EI ETWCB-I 230V 60 Hz 4.3 26.3
600 810 3000 4065 1.0 ETW3000E TW3000EI ETWCB-E 230V 50 Hz 4.3 26.3
1200 1625 6000 8135 1.5 ETW6000B TW6000B ETWCB-B 115V 60 Hz 1.9 42.1
1200 1625 6000 8135 1.5 ETW6000I TW6000EI ETWCB-I 230V 60 Hz 2.9 42.1
1200 1625 6000 8135 1.5 ETW6000E TW6000EI ETWCB-E 230V 50 Hz 2.9 42.1

* Weight of wrench only without reaction arm. Reaction arm weight for ETW1000, ETW2000, ETW3000 is 2.9 lbs. and for the ETW6000 is 7.75 lbs. Standard reaction arm included with TW-models. Weight of control box is 20 lbs.
** Use of ETW requires both wrench and control box. These may be purchased separately, or as a calibrated set.

Voltage: (Model No. ending with suffix)
B = 115V, 60 Hz
I = 230V, 60 Hz (with NEMA 6-15 plug)
E = 230V, 50 Hz (with commonly used European (SCHUKO) plug)

Optional Accessories

For use with PTW and ETW1000, 2000, 3000-models
No. Description Model Nr. Application Dimensions (mm)
A B C D
1 Extended Drive, 6 inch (152 mm) ED6TWS Nose extension, primarily for truck wheel bolts 62 206 73 -
1 Extended Drive, 12 inch (305 mm) ED12TWS 62 384 73 -
1 Extended Drive, 18 inch (457 mm) ED18TWS 62 511 73 -
2 Standard Reaction Arm RATWS Standard arm included with PTW/ETW model 76 172 102 21
3 Extended Reaction Arm ERATWS Long plate for use with deep well sockets 73 150 202 51
4 Sliding Reaction Arm SLRATWS For widely spaced and uneven bolt centers 112 381 203 102
5 Double Straight Reaction Arm DSATWS Reduces time to reposition arm * 73 406 19 102
6 Straight Reaction Arm SRATWS Long plate for wide spaced reaction points 73 240 19 51
7 Blank Reaction Arm ** BLTWS Weldable blank for custom applications ** 72 151 25 51
For use with PTW and ETW6000-models
1 Extended Drive, 6 inch (152 mm) ED6TWL Nose extension, primarily for truck wheel bolts 84 232 102 -
1 Extended Drive, 12 inch (305 mm) ED12TWL 84 384 102 -
2 Standard Reaction Arm RATWL Standard arm included with PTW/ETW model 102 229 146 32
3 Extended Reaction Arm ERATWL Long plate for use with deep well sockets 102 254 184 64
4 Sliding Reaction Arm SLRATWL For widely spaced and uneven bolt centers 152 419 190 114
5 Double Straight Arm DSATWL Reduces time to reposition arm * 102 508 32 57
6 Straight Reaction Arm SRATWL Long plate for wide spaced reaction points 102 305 32 57
7 Blank Reaction Arm ** BLTWL Weldable blank for custom applications ** 102 152 32 57

* Time to reposition arm when repeatedly moving from tightening to loosening.
** WARNING: Blank reaction arms must be heat treated to HRc 38-42 prior to use.

POWERFUL SOLUTIONS. GLOBAL FORCE.