V-Series, Hydraulic Pressure and Flow Control Valves

  • Enerpac flow and pressure control valves are rated for 700 bar operating pressure
  • All valves feature NPTF porting to insure against leakage at rated pressure
  • All valves are painted, coated, or plated for corrosion resistance                 
  • Needle valves: to control cylinder speed
    V-82: can also be used as shut-off valve for temporary load holding
    V-182: as V-82, also suitable for gauge snubbing
    V-8F: as V-82, but with very fine metering for precise flow control. Not remommended as shut-off valve
  • V-91: Snubber valve, prevent snapping of gauge pointer when load or pressure is suddenly released. Also suitable as shut-off valve to protect gauge during high cycle applications
  • V-10: auto damper valve; protect gauge during high cycle applications
  • Check valves: for load holding with cylinders, to control oil flow direction
    V-17: to resist shock and operate with low pressure drop
    V-42: pilot-operated, pilot pressure ratio 14%
    V-66: manually operated
    V-66F: same as V-66, but with fine metering for precise oil flow control
  • Pressure relief valves: limits pressure in circuit developed by pump
    V-152: ±3% repeatability
  • V-161: sequence valve; to control oil flow to a secondary circuit.
 Hydraulic
Symbol
Model
Number
Thread

NPTF
Operating
Pressure
bar
V-82
V-182
V-8F
3/8"
1/4"
3/8"
0-700
0-700
0-700
V-911/2"0-700
V-101/2"0-700
V-173/8"0-700
V-423/8"0-700
V-66
V-66F
V-66NV *
3/8"
3/8"
3/8"
0-700
0-700
0-700
V-152
V-152NV *
3/8"
3/8"
55-700
55-700
V-1613/8"140-700
POWERFUL SOLUTIONS. GLOBAL FORCE.