ECH, ECM-Series, Pull down clamps
- Enerpac low profile pull down clamps for unobstructed top face machining
- Independent horizontal and vertical movement for a true pull down effect
- Compact size and low height allows more flexible and economic mounting than comparable dedicated vise
- Manifold and BSPP porting
- Contamination resistant design for low maintenance, removable guard for chip removal
- Oil ports on both sides for mounting flexibility
- Optional mechanical counter hold provides pull down on end stop for large parts
- Mounting bolts included for ease of installation
|3,9||1,3||5,1||ECH-52||1,16||0,13||M8 x 45||ECM-52|
|17,4||5,8||7,9||ECH-202||5,03||1,07||M12 x 80||ECM-202|
* Torque M8 with 25 Nm, M12 with 85 Nm. The use of T-nuts requires longer bolts.
** Mechanical counter holds are sold separately.