Home » Industrial Tools » Bolting » Joint Assembly Tools

ATM-Series, Flange Alignment Tools

  • Enerpac flange alignment tools rectify twists and rotational misalignment without additional stress in pipe lines
  • For most commonly used ANSI, API, BS and DIN flanges
  • No slings, hooks, or lifting gear. Extremely safe, high precision
  • ATM-1 manual flange alignment: supplied with three bushings for different bolt hole sizes. Can be used in reversed position
  • ATM-3 mechanical flange alignment: fits on the following flanges:
      – Ring Type Joints: flange wall thickness min 30 - max 100 mm
      – Gasket Type Joints: flange wall thickness min 25 - max 115 mm
  • ATM-5 hydraulic flange alignment: fits when flange joint is:
      – between 93 - 228 mm [3.75 - 9 inch] apart and
      – bolt hole size 31,5 mm [1.25 inch] or greater
  • Can be installed and used in any position and any location
  • Stays stable in position under full load.

Max. Lifting
force		TypeModel
Number		Bolt Hole RangeFlange Wall ThicknessWeight
ton (kN)man.mech.hydr. mminchmminchkg
0,3 (3)•--ATM- 117 - 27,211/16 - 1 1/817 - 5011/16 - 22,0
3,0 (27)-•-ATM- 325 - 541 - 2 1/830 - 1151 3/16 - 4 1/29,7
5,0 (45)--•ATM-5 *≥ 31,5≥ 1 1/480 - 2033 1/8 - 816,2

* Includes 700 bar hydraulics: cylinder RC-53, handpump P-142 and 1,8 meter long hose HC-7206C.