SL-Series, Lower flange models swing cylinders

Enerpac lower flange model swing cylinders do not require a fixture hole – cylinder can be bolted directly to fixture
Flexible design allows for manifold or threaded port connection
Easiest mounting preparation in the swing cylinder line
Symmetrical rectangular flange design enables clamping at three sides of the cylinder
Allows extra large parts to be clamped

Clamp Force ¹⁾	Stroke		Left * Turning Model Number	Right * Turning Model Number	Cyl. Type		Effective Area		Max. Oil Flow ¹⁾	Clamp Arms ¹⁾
kN	mm				Cyl. Type		cm²		l/min	Clamp Arms ¹⁾
kN	Clamp	Total			S/A	D/A	Clamp	Unclamp	l/min	Standard	Long
2,1	8,0	16,5	SLLS-22	SLRS-22	•	–	0,77	–	0,2	CAS-22	CAL-22
4,9	10,0	22,6	SLLS-52	SLRS-52	•	–	1,81	–	0,4	CAS-52	CAL-52
8,0	12,0	23,0	SLLS-92	SLRS-92	•	–	3,16	–	1,0	CAS-92	CAL-92
10,7	13,0	27,9	SLLS-121	SLRS-121	•	–	4,06	–	1,6	CAS-121	CAL-122
17,4	14,0	29,5	SLLS-202	SLRS-202	•	–	7,10	–	2,3	CAS-202	CAL-202
33,1	16,0	32,6	SLLS-352	SLRS-352	•	–	12,39	–	3,9	CAS-352	CAL-352
2,2	8,0	16,5	SLLD-22	SLRD-22	–	•	0,77	1,55	0,2	CAS-22	CAL-22
5,6	10,0	22,6	SLLD-52	SLRD-52	–	•	1,81	3,81	0,4	CAS-52	CAL-52
9,0	12,0	23,0	SLLD-92	SLRD-92	–	•	3,16	8,06	1,0	CAS-92	CAL-92
11,6	13,0	27,9	SLLD-121	SLRD-121	–	•	4,06	7,94	1,6	CAS-121	CAL-122
18,7	14,0	29,5	SLLD-202	SLRD-202	–	•	7,10	15,16	2,3	CAS-202	CAL-202
33,8	16,0	32,6	SLLD-352	SLRD-352	–	•	12,39	23,74	3,9	CAS-352	CAL-352

1) Clamp force with standard clamp arm. Clamp arms are sold separately.
Clamp forces for single-acting models are reduced in order to overcome return spring force.
* For models with straight plunger movement, replace L or R with S. Example: SLSD-92.