V-series, pressure and flow control valves

  • Needle valves: to control cylinder speed
    V-82: can also be used as shut-off valve for temporary load holding
    V-182: as V-82, also suitable for gauge snubbing
    V-8F: as V-82, but with very fine metering for precise flow control. Not remommended as shut-off valve
  • V-91: Snubber valve, prevent snapping of gauge pointer when load or pressure is suddenly released. Also suitable as shut-off valve to protect gauge during high cycle applications
  • V-10: auto damper valve; protect gauge during high cycle applications
  • Check valves: for load holding with cylinders, to control oil flow direction
    V-17: to resist shock and operate with low pressure drop
    V-42: pilot-operated, pilot pressure ratio 14%
    V-66: manually operated
    V-66F: same as V-66, but with fine metering for precise oil flow control
  • Pressure relief valves: limits pressure in circuit developed by pump
    V-152: ±3% repeatability
  • V-161: sequence valve; to control oil flow to a secondary circuit.

 

  Hydraulic
Symbol		 Model
Number		 Thread

NPTF		 Operating
Pressure
bar
V-82
V-182
V-8F		 3/8"
1/4"
3/8"		 0-700
0-700
0-700
V-91 1/2" 0-700
V-10 1/2" 0-700
V-17 3/8" 0-700
V-42 3/8" 0-700
V-66
V-66F
V-66NV *		 3/8"
3/8"
3/8"		 0-700
0-700
0-700
V-152
V-152NV *		 3/8"
3/8"		 55-700
55-700
V-161 3/8" 140-700