System Components
The complete line of Enerpac’s Workholding Systems Components – gauges, pressure switches, hoses, couplers – is available in a variety of sizes, and is versatile enough for many applications. Specialized workholding components such as accumulators and automatic coupler systems complete the full range of products. Each component is engineered to make your work easier and safer to perform.
GA, GS, NV, V-Series, Gauge Accessories
Enerpac workholding gauge accessories:
GA-Series Gauge Adaptor
- For easy mounting of a gauge onto your hydraulic system
GA-918 Swivel Adaptor
- Simplifies gauge installation
- Provides swivel connection for easy scale reading
V-91 and NV-251 Needle Valves
- V-91 Snubber valve: provide positive shut-off
- NV-251: 303 Stainless steel stem, 16 threads/inch
DGR-Series, Digital Pressure Gauge
- Enerpac workholding digital pressure gauge has two modes:
Automatic shut off (15 min)
Continuous gauge display - Zero reset - ensures that gauge reads actual system pressure
- Display in psi, bar, MPa, mbar, hPa and kPa
- 3 volt battery, 1400 hours operation
- IP 65 protection
A, C-Series, Hydraulic Couplers
Enerpac workholding hydraulic couplers
C-series, high flow couplers
- High pressure couplers recommended for use on all Enerpac pumps and cylinders
A-series, quick connect couplers
- Low leakage couplers for easy connection of hydraulic circuits
*Note: Thread size AR-650 is 1/4” NPT.
Use FZ-1055 Fitting to connect to 3/8” NPT Hose ends.
H700-Series, High Pressure Hoses
- Enerpac high pressure hoses have a maximum workholding pressure of 700 bar
- Thermo-Plastic Safety Hoses
- For demanding applications, featuring a 4:1 design factor
- Four layer design, including two high strength steel wire braids
- Outside jacket is polyurethane to provide maxium abrasion resistance
- Low volumetric expansion under pressure to enhance overall system efficiency
- Crimped-on rubber strain relief for improved life and durability on all models
BFZ, FZ-Series, High Pressure Fittings
- Enerpac workholding high pressure fittings provide a proper connection for hydraulic components
- Male and female BSPP, UNF, NPT threaded fittings in common sizes allow easy connection of all components
- BFZ and FZ-1000 pressure fitting models are 700 bar maximum pressure
- FZ-2000 pressure fitting models are 350 bar maximum pressure
FL-Series, High Pressure Filters
- Enerpac workholding inline high pressure filters to keep your hydraulic system clean
- Plated stainless steel wire mesh screen
- Rated for full system pressure up to 350 bar
- Filtration of hydraulic oil in advance and retract oil flow direction
- Two piece body construction for easy replacement of filter elements
- High flow rates are obtainable with a minimum pressure drop
- Threaded port connections on each end simplify installation
MCA, MPA, WCA-Series, Auto-Coupler Systems
- Enerpac auto-coupler systems are available in two (62 and 82 model) or four port (64 model) connection
- For automated coupling of hydraulic circuits on palletized systems
- Sensing feedback of coupler position allows for fully automated applications
- Horizontal or vertical mounting for flexible installation on machine tools
- Adjustment stroke allows clearance for pallet indexing
- Coupler elements supplied with air blow-off nozzles to prevent damage from contamination
- Two base station auto-coupler models: MCA-62 for low pallets clearance; WCA-82 for additional pallet clearance.
* Use the AT-series alignment tool to adjust the position of the pallet station in relation to the base station.
** Maximum oil flow of hydraulic nozzles: 17 l/min.
CR, CRV-Series, Rotary Couplers
- Enerpac rotary couplers provide a permanent hydraulic connection on indexing and rotating work stations
- High rotation per minute
- Low starting torque
- Internal oil bearings for increased lifetime
- Single, 2 or 4 passage coupler type
1) Before selecting, note the starting torque and speed diagrams on the catalogue page.
Maximum oil flow: 9 l/min.
G-Series, Pressure Gauges
- Enerpac workholding pressure gauges are highly reliable
- Accurate pressure sensing, ± 1,5 % accuracy of full scale
- All pressure sensing parts sealed and dampened by glycerine for long life
- Includes safety blow-out disk and pressure equalizing membrane to prevent overpressurization
- Copper alloy, coiled safety Bourdon tube for 70 bar and higher
- Dual psi and bar scale readings
* L in model number means lower mount, R is rear mount.
A-Series, Manifolds
- Enerpac workholding hydraulic manifolds are designed for multiple hydraulic line connections at one central location
- Directing hydraulic oil to or from a pressure source