HAND PUMP AND SINGLE-ACTING CYLINDER MATCHING CHART
Capacity → 5 t 10 t 15 t 25 t 30 t 50 t 60 t 75 t 100 t 150 t
↓Stroke
< 1.00"  
 
 
        
 
    
1.00"                    
2.00"                     
3.00"                     
4.00"                     
5.00"                    
6.00"                    
7.00"                    
8.00"                    
9.00"                    
10.00"                    
12.00"                    
13.00"                    
14.00"                    
 P-392  P-80 P-462
Note: Selection based on oil capacity requirements of cylinders

POWER PUMP SELECTION CHART
Flow* Low
( 20 in3/min)		 Medium
(60 to 200 in3/min)		 High
( 463 in3/min)
Reservoir Oil Capacity
Duty Cycle**		 0.5-1 gal
Intermittent		 1.5 gal
Extended 		1.0-10 gal
Intermittent		 1.0-10 gal
Extended		 25 gal
Portable/Stationary***  Portable
 Stationary
  Portable  Stationary  Extended
Recommended Series Economy Submerged ZU4 series ZE3-6   8000 series
 
* Flow
  • Determined by motor size
  • Directly affects electrical power requirements
  • Determines cylinder or tool speed
** Duty Cycle
  • Extended applications require more then one hour of uninterrupted pump use.
  • Intermittent use - from 20 minutes to one hour, depending on reservoir capacity
*** Portability
     Portable
  • Ergonomic handles
  • Flexible power requirments
     Stationary
  • Mounting options
  • Normally requires stable power


© Enerpac 2004
www.enerpac.com