Single Acting, RACL series Aluminum Cylinders

RACL series

Aluminum Lock Nut Cylinders

Integral Stop Ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
Aluminum Lock Nut provides mechanical load holding for extended periods
Hard-Coat finish on all surfaces resists damage and extends cylinder life
Handles standard on all models
High-strength return spring for rapid cylinder retraction
Composite Bearings prevent metal to metal contact increasing cylinder life and resistance to side-loads up to 5%
Steel baseplate and saddle for protection against load-induced damage

Cylinder Capacity	Stroke	Model Number	Cylinder Effective Area	Oil Capacity	Coll. Height	Weight
ton	in	Model Number	in²	in³	in	lbs
50	1.97	RACL-502	10.99	21.63	9.29	20.5
	3.94	RACL-504		43.27	11.26	23.4
	5.91	RACL-506		64.90	13.23	26.2
100]	1.97	RACL-1002	22.19	43.68	11.65	48.3
	3.94	RACL-1004		87.36	13.62	53.3
	5.91	RACL-1006		131.04	15.59	58.4
150	1.97	RACL-1502	35.18	69.25	12.72	71.0
	3.94	RACL-1504		138.61	14.69	79.8
	5.91	RACL-1506		207.91	16.65	88.6

Aluminium differs from steel in that it has a lower finite fatigue life. This means that aluminium cylinders should NOT be used in high-cycle applications, such as production.

The Enerpac line of aluminium cylinders are designed to provide 5000 full-pressure cycles. This limit should not be exceeded. In normal lifting and many maintenance applications, this will provide a lifetime on use.