SHS45540MW, SyncHoist, Lastpositionierung, 4 Zylinder, 539 kN Kapazität, 100 mm Zylinderhub, Handsteuerungssystem, 400 VAC, 50 Hz
SHS45540MW, SyncHoist, Lastpositionierung, 4 Zylinder, 539 kN Kapazität, 100 mm Zylinderhub, Handsteuerungssystem, 400 VAC, 50 Hz
The SHS-Series SyncHoist system is a below-the-hook sling adjuster (hydraulic turnbuckle) which is typically comprised of multiple specialized hydraulic cylinder and valve combinations mounted directly in-line with the rigging which provides an operator the freedom to precisely monitor and adjust each lifting point independently. The use of integrated cylinder stroke sensors and pressure transducers at each lifting point allow for position and load feedback at the operator control station. PLC controls deliver operator safety while the intelligent hydraulics monitor and guide the compact hydraulic cylinders.
Accurate hoisting and load positioning enhance the capability of a single crane. With the use of a single crane, the load can be precisely maneuvered in a vertical and horizontal plane. Utilizing a single crane reduces risk and cost, and vastly improves operating speed and worker safety. A single crane also reduces the risk of damage from oscillations of wire rope due to sudden crane starts/stops.
The synchronous hoist system can be used for pre-programmed positioning, tilting, aligning and high precision horizontal and vertical load positioning.
The SHS-Series SyncHoist system is a below-the-hook sling adjuster (hydraulic turnbuckle) which is typically comprised of multiple specialized hydraulic cylinder and valve combinations mounted directly in-line with the rigging which provides an operator the freedom to precisely monitor and adjust each lifting point independently. The use of integrated cylinder stroke sensors and pressure transducers at each lifting point allow for position and load feedback at the operator control station. PLC controls deliver operator safety while the intelligent hydraulics monitor and guide the compact hydraulic cylinders.
Accurate hoisting and load positioning enhance the capability of a single crane. With the use of a single crane, the load can be precisely maneuvered in a vertical and horizontal plane. Utilizing a single crane reduces risk and cost, and vastly improves operating speed and worker safety. A single crane also reduces the risk of damage from oscillations of wire rope due to sudden crane starts/stops.
The synchronous hoist system can be used for pre-programmed positioning, tilting, aligning and high precision horizontal and vertical load positioning.
- Hochpräzise Lastbewegung, vertikal und horizontal – mit nur einem Kran
- Reduziert das Risiko der Beschädigung durch Schwingungen des Drahtseils aufgrund plötzlicher Start-/Stoppbewegungen und Rütteln des Krans
- Erheblich verbesserte Arbeitssicherheit, Betriebsgeschwindigkeit und Steuerung
- Wetterbedingungen spielen eine weniger kritische Rolle
- SPS-gesteuerte Hydraulik erlaubt einen genauen Hub mithilfe des Hub- und Lastpositionierungssystems
- Doppeltwirkende Schub-/Zugzylinder mit vorgesteuerten Rückschlagventilen sorgen für zusätzliche Sicherheit im Falle von Schlauchbruch oder Kupplungsbeschädigung
- Kostensenkung im Vergleich zu konventionellen Lastpositionierungsmethoden. Steuerungsoptionen:
- Manuelle Steuerung: Systemwarnfunktionen
- Automatische Steuerung: vollständig überwachtes SPS-System mit programmierbaren Funktionen mittels Touchscreen und Systemwarnfunktionen.