WFC222, 5,000 lbs Capacity, 0.41 in Stroke, Work Support, Cartidge Style, Hydraulic Advance
Item ID: WFC222
$773.23
Free ShippingEst. Ship date is Mon, Nov 30th 2026
Product Specifications
Maximum Support Force (lbs)5000
Mounting Dimension F min. (mm)71,1
Plunger Contact Spring Force Retract (N)86,8
Available - Backorder
About this Product
Features
- Plunger stays retracted until pressure is applied allowing unobstructed loading
- Low pressure lock-up capability enables the use of machine tool hydraulic systems
- High rated support capacities allow for more compact fixture design
- Corrosion resistant materials – compatible with most coolants and environments
- Threaded and manifold air vent ports allow fixturing that prevents coolants and debris from being ingested into the mechanism
- Minimized deflection increases machining accuracy
- Multiple mounting configurations for design flexibility
- Contact bolt included
- Support force and clamping force must be matched. Support force should be at least 150% of clamping force.
- Do not exceed maximum flow rates to avoid premature lockup.
- Always center load over work support.
- Enerpac work supports provide either additional non-fixed location points to the clamps, or support to larger or thin section workpiece components, always in order to minimize workpiece deflection during machining.
Units:
Maximum Operating Pressure (psi)5000
Minimum Operating Pressure (psi)700
Mounting StyleCartridge
Maximum Support Force (lbs)5000
Plunger Contact Spring Force Advance (lbs)2.1
Plunger Contact Spring Force Retract (lbs)19.5
Oil Capacity (in3)0.19
Maximum Oil Flow (in3/min)190
Stroke (inch)0.41
Ventilation Below Force RequiredYes
Weight (lbs)4
Units:
Dimension A4.56"
Dimension B4.15"
Dimension C3.6"
Dimension DM60 x 1,5"
Dimension E1.496"
Dimension F1"
Dimension KM10 x 1,5"