Enerpac Logo

SWi2025TEMAXEX, 240 kN, ATEX Certified External Hydraulic Flange Spreader Maxi Set, 103,5 mm Maximum Spread

SWi2025TEMAXEX
SWi2025TEMAXEX
  1. SWi2025TEMAXEX
  2. SWi2025TEMAXEX

SWi2025TEMAXEX, 240 kN, ATEX Certified External Hydraulic Flange Spreader Maxi Set, 103,5 mm Maximum Spread

Equalizer innovative flange spreading wedges. A simple solution to hydraulically spread flange joints with a minimum access gap of 6.0 mm (0.24") and certified for use in hazardous areas.

Model: SWi2025TEMAXEX   |  ECCN: EAR99    |   Harmonization: 8479899599
Series: SWi   |  Product Line: Bolting Tools

Equalizer innovative flange spreading wedges. A simple solution to hydraulically spread flange joints with a minimum access gap of 6.0 mm (0.24") and certified for use in hazardous areas.

  • Maxi Set Includes
  • 2 x SWi20/25TEEX Flange Spreader Wedgeheads
  • 2 x 700 bar (10 000 psi) Hydraulic Cylinders
  • 2 x 700 bar (10 000 psi) ATEX Hydraulic Hoses, 2 m (78.8”) with 90 degree elbow
  • 1 x 700 bar (10 000 psi) HP550DMINEX Sealed Hand Pump with Gauges
  • 2 x Sets of Safety Blocks
  • 2 x Pairs of Stepped Blocks
  • 2 x Hex Keys
  • 2 x Safety Lanyards
  • 1 x Instruction Manual
  • 1 x Carry Case, Case Dimensions: 930 mm x 600 mm x 180 mm
  • User Features
  • Certified for use in the hazardous areas:
    II 2G ck IIB T6/II 2D ck T85 °C
  • Practical, portable and lightweight
  • Moulded plastic handle for comfort
  • Revolving handle to aid horizontal or vertical spreading
  • Offset handle is directly over the centre of mass
  • Removable handle for improved access
  • Revolving lanyard connection point
  • Swivel hose coupler with elbow – improves access by allowing hose to revolve
  • Spread indicator markings for clear precise visual progress feedback
  • Safety Features
  • No finger pinch-points
  • Increased step depth on upper steps
  • Safety lanyard – 1.0 m (39") length
  • Partially recessed coupler reduces coupler vulnerability
  • Forged key components for strength and reliability
  • Fail-safe design – designated cylinder nose seal failure
  • Maintenance Features
  • Rapid disassembly and assembly
  • Quick jaw replacement – remove 1 fastener
  • Quick tip replacement – remove 2 fasteners
  • Narrow jaw teeth – improved tool wear
  • ATEX Certified
  • II 2G Ex h IIB T6 Gb
  • II 2D Ex h IIIC T85 degrees C