Enerpac Logo

RC1003A, 100 ton (889,6 kN) Capacity, 3 in (76,2 mm) Stroke, Single-Acting, Center Hole Hydraulic Cylinder

Single-Acting, Center Hole Hydraulic Cylinder Jack Ram Series RC
  1. Single-Acting, Center Hole Hydraulic Cylinder Jack Ram Series RC

RC1003A, 100 ton (889,6 kN) Capacity, 3 in (76,2 mm) Stroke, Single-Acting, Center Hole Hydraulic Cylinder

Simplex RC Series Hollow Plunger Hydraulic Cylinders offer the versatility needed to take on a wide range of applications. The hollow plunger design allows bars or rods to be pulled through the inside bore to enable pulling and pushing applications – ideal for tensioning cables, bolts, and pulling sleeves or bearings.

Inside the cylinder is a high-strength return spring for plunger retraction and stop rings for blow out protection. The cylinder exterior is finished with an enamel coating to extend cylinder life, and a wiper protects the inner cylinder assembly from dirt, moisture, and other contaminants.

Model: RC1003A   |  ECCN: EAR99    |   Harmonization: 8412210075
Series: RC - Simplex   |  Product Line: Hydraulic Tools

Simplex RC Series Hollow Plunger Hydraulic Cylinders offer the versatility needed to take on a wide range of applications. The hollow plunger design allows bars or rods to be pulled through the inside bore to enable pulling and pushing applications – ideal for tensioning cables, bolts, and pulling sleeves or bearings.

Inside the cylinder is a high-strength return spring for plunger retraction and stop rings for blow out protection. The cylinder exterior is finished with an enamel coating to extend cylinder life, and a wiper protects the inner cylinder assembly from dirt, moisture, and other contaminants.

  • Induction hardened piston rod for added strength eliminates the need for a saddle.
  • Collar threads for easy fixing of components.
  • Hollow plunger design allows for both push & pull forces.
  • Large center hole for greater flexibility.
  • Heavy duty spring delivers fast and full retraction
  • Stop rings prevent piston blow-out
  • Wiper protects inner cylinder from dirt.
  • Meets ANSI/ASME B30.1 Safety Standards
  • Load tested under 125% of the nominal capacity
  • For working pressures up to 10,000 psi (700 bar)