CULP20, 198 kN Capacity, 6 mm Stroke, Ultra Flat Hydraulic Cylinder with Stop Ring
CULP20, 198 kN Capacity, 6 mm Stroke, Ultra Flat Hydraulic Cylinder with Stop Ring
CULP-Series Low Height Hydraulic Cylinders, also known as hydraulic pancake cylinders, offer an impressive power to height ratio, making them the right choice for confined spaces where other cylinders will not fit.
There are several configurations to choose from, with tonnage capacities ranging from 10 to 100 imperial tons (97-1077 kN), and collapsed heights from 1.08 - 2.55” (27.5 – 65mm).
All are finished with a tough Nitrocarburized coating for enhanced corrosion protection in harsh working environments.
Series: CULP | Product Line: Industrial Tools
CULP-Series Low Height Hydraulic Cylinders, also known as hydraulic pancake cylinders, offer an impressive power to height ratio, making them the right choice for confined spaces where other cylinders will not fit.
There are several configurations to choose from, with tonnage capacities ranging from 10 to 100 imperial tons (97-1077 kN), and collapsed heights from 1.08 - 2.55” (27.5 – 65mm).
All are finished with a tough Nitrocarburized coating for enhanced corrosion protection in harsh working environments.
- Up to 4% side load of maximum capacity
- Stop ring for maximum stroke limitation
- Extremely low collapsed height
- Nitrocarburized surface treatment for harsh conditions.
- Coupler AR630 including dustcap: Use HB7206 hose including AH630 coupler to connect to your pump
- All Ultra Flat Cylinders require a solid lifting surface for correct support. The use of these flat cylinders on surfaces such as sand, mud or dirt, may result in cylinder damage.