Enerpac Logo

MSFP10, 50 kN, Hydraulic Cylinder and Hand Pump Set with 22 Cylinder Attachments

MSFP10
  1. MSFP10

MSFP10, 50 kN, Hydraulic Cylinder and Hand Pump Set with 22 Cylinder Attachments

The MSFP10 hydraulic pump and cylinder set equips you to complete many maintenance tasks. The assortment of 22 accessories enables you to quickly configure the ideal tool for a multitude of challenges.

This set includes our popular RC106 Hydraulic Cylinder, which when used with our attachments can exert forces up to 5 tons (50kN), delivering a stroke up to 6.13" (156mm) - Ideal when you need to push, pull, lift, press, straighten, spread, or clamp.

Also included is the lightweight P392 two-speed hydraulic hand pump, hose, gauge, WR5 spreader attachment, lock-on or threaded connectors, and a storage crate.

Safe Operation
When using hydraulic cylinders with maintenance set attachments or components, the maximum system pressure must be limited to half of the rated pressure (5,000 psi / 350 bar). When not using attachments, the tonnage and pressure capacities are double these values.

Only use attachments provided with the set. Using non-Enerpac attachments and longer extension tubes could reduce column strength - potentially creating unsafe conditions.

Model: MSFP10   |  ECCN: EAR99    |   Harmonization: 8479899599
Series: MSFP   |  Product Line: Industrial Tools

The MSFP10 hydraulic pump and cylinder set equips you to complete many maintenance tasks. The assortment of 22 accessories enables you to quickly configure the ideal tool for a multitude of challenges.

This set includes our popular RC106 Hydraulic Cylinder, which when used with our attachments can exert forces up to 5 tons (50kN), delivering a stroke up to 6.13" (156mm) - Ideal when you need to push, pull, lift, press, straighten, spread, or clamp.

Also included is the lightweight P392 two-speed hydraulic hand pump, hose, gauge, WR5 spreader attachment, lock-on or threaded connectors, and a storage crate.

Safe Operation
When using hydraulic cylinders with maintenance set attachments or components, the maximum system pressure must be limited to half of the rated pressure (5,000 psi / 350 bar). When not using attachments, the tonnage and pressure capacities are double these values.

Only use attachments provided with the set. Using non-Enerpac attachments and longer extension tubes could reduce column strength - potentially creating unsafe conditions.

  • Enerpac Maintenance sets are a complete assortment of accessories matched to hydraulic powered tools. Using these sets allows you to quickly configure a unique tool to meet your most difficult jobs.Built around the Enerpac lightweight hand pump, hose and cylinder, these sets enable you to push, pull, lift, press, straighten, spread and clamp.
  • All sets include a pump, hose, cylinder, and gauge
  • Lock-on or threaded connectors
  • Complete set for almost every maintenance application
  • When cylinders are used with maintenance set attach ments or components, the maximum system pressure must be limited to half the rated pressure (350 bar).
  • If no attachments are being used, capacity is double these values. Maximum operating pressure is then 700 bar
  • Only use attachments provided with set. Non-Enerpac attachments and longer extension tubes will reduce column strength, potentially creating unsafe conditions