SHAS411040WE, Synchronous Hoist System, 4 Cylinders, 4 x 1078 kN Capacity, 1000 mm Stroke, Wireless Control System, 460-480 VAC, 60 Hz
SHAS411040WE, Synchronous Hoist System, 4 Cylinders, 4 x 1078 kN Capacity, 1000 mm Stroke, Wireless Control System, 460-480 VAC, 60 Hz
The SHAS-Series Synchronous Hoist System is a below-the-hook sling adjuster (hydraulic turnbuckle) comprised of multiple self-contained, PLC-controlled hydraulic lifting devices. The system enables a single crane to precisely position heavy and unbalanced loads. Each of the lifting devices includes a double-acting hydraulic push pull cylinder with an integrated pump and controls. Integrating the pump eliminates the need for an external power pack and hydraulic hoses.
The wireless remote control ensures a single operator is able to control the SyncHoist while remaining at a safe distance. The operator has full control over load handling; each cylinder can lift or lower independently. The system can perform several types of movements including synchronous lifting and lowering, balancing, and tilting, all of which can be pre-programmed.
Series: SHAS | Product Line: Heavy Lifting Technology
The SHAS-Series Synchronous Hoist System is a below-the-hook sling adjuster (hydraulic turnbuckle) comprised of multiple self-contained, PLC-controlled hydraulic lifting devices. The system enables a single crane to precisely position heavy and unbalanced loads. Each of the lifting devices includes a double-acting hydraulic push pull cylinder with an integrated pump and controls. Integrating the pump eliminates the need for an external power pack and hydraulic hoses.
The wireless remote control ensures a single operator is able to control the SyncHoist while remaining at a safe distance. The operator has full control over load handling; each cylinder can lift or lower independently. The system can perform several types of movements including synchronous lifting and lowering, balancing, and tilting, all of which can be pre-programmed.
- Enerpac SyncHoist is a unique crane product for below-the- hook positioning of heavy loads that require precision placement. The SyncHoist system may reduce the number of cranes needed and reduce the costs of multiple picks.
- High precision horizontal and vertical load positioning
- Pre-programmed positioning, tilting and aligning
- High precision load maneuvering using one crane
- Reduces the risk of damage from oscillations of wire rope due to crane jogging and sudden starts/stops
- Vastly improving worker safety, operating speed and control
- PLC-controlled hydraulics turn lifting into high accuracy hoisting and load positioning system
- Double-acting push/pull cylinders with load holding valves for added safety
- Increased efficiency compared to conventional load positioning methods
- Complete system tested in compliance with European lifting directive and safety requirements
- Pump and cylinders includes 4x 82 feet hydraulic hoses with couplers
- Automatic control
- Load and stroke monitoring, and stroke control
- PLC-control and touch screen
- Solenoid valves with pendant
- Pre-programmable motions and data recording
- System warnings for:
- maximum cylinder load control setting
- stroke and position control
- thermal motor protection
- oil level and filter indicator