Home / Applications

Filter Products

Power Gen Solutions

Applications

Enerpac has gained unique expertise in delivering hydraulic solutions for the controlled movement and positioning of structures.

Positioning Structural Steel for the Roof of the Mercedes-Benz Stadium

In 2014, the Atlanta Falcons broke ground on a $1.4 billion new stadium in downtown Atlanta. Set to complete in 2017, the 30-story structure will contain roughly 20,000 tons of structural steel, a retractable roof and a 360-degree halo video board that will span five stories inside the stadium.

Stadiums

Lightweight Piping Isolation Test Tools Ensured Safety during Maintenance Shutdown

Box Girder Launching System on the I-95 Whittier Bridge

Constructed in 1951, the John Greenleaf Whittier Bridge is currently in the process of being replaced by a new bridge compliant with current safety standards. The high traffic bridge connects Newburyport and Amesbury via I-95 over the Merrimack River.

Bridges

Transformer Lift and Weigh Saves Freight Cost

Machinery Movers needed to know the exact weight of a transformer before it was shipped from New Zealand to India. A load in excess of the port’s 110 ton maximum lifting capacity would require a special ship to be brought in which would incur significant freight costs.

Power Generation

Jack Up System Lifts 1,500-ton Span on Fore River Bridge

No one would call the temporary bridge that was constructed in 2002 over the Fore River between Quincy and Weymouth, Mass., a work of art. The bridge replaced a 1936 Art Deco gem when it could no longer safely carry the 32,000 cars that cross the river each weekday.

Bridges

Power Plant Heaters Installed with a Telescopic Hydraulic Gantry

Leading North African international logistics company, Marine Maroc, has used its new Enerpac SL400 gantry to install high pressure heaters weighing 130 tons at the 2×693 MW Safi coal-fired power plant located close to the city of Safi in Southwest Morocco.

Power Generation

Installation of Tidal Turbines on the Eastern Scheldt Storm Surge Barrier

The Eastern Scheldt (Oosterscheldekering) is a series of dams and storm surge barriers protecting the Netherlands from flooding from the North Sea. Part of a renewable energy project included the installation of five tidal turbines on the storm surge barrier. Huisman Equipment was tasked with the construction of steel structure to mount the tidal turbines to the barrier. Installation of the Tidal Power Plant needed to be completed with precision and pace. Changes in the water levels and the tide required the entire installation be complete in a two hour window.

Power Generation

Repairing the Foundation of a Sinking Apartment Building

Underground coal extraction led to the erosion of the ground causing a nearby apartment building to tilt. The apartment's foundation needed to be lifted 61 cm in order to re-level the sinking apartment building.

Infrastructure

Offshore Highway Construction - Lifting Challenges

The offshore highway is of a multi span bridge structure located in the open sea 100m to 200m from the shoreline. Each bridge pier consists of various concrete components, one of which will be a reinforced concrete, gravity base, which is placed on the seabed.

Infrastructure

Enerpac JS-250 Jack-Up System Deployed for Bridge Removal

The extension of Runway B at Narita Airport required the creation of a new grade-separated intersection between the Higashi-Kanto Expressway and the extended section of Runway B.

Infrastructure

Assembling Tower Crane Sections with a Hydraulic Torque Wrench

Numerous joints need to be bolted together during the erection and disassembly of a tower crane. The stability of the tower crane is dependent on the integrity of its bolted sections. The precise application of torque is critical to ensure the tower crane’s stability.

Infrastructure

Lifting and Installing the Deck Sections of the Golden Horn Metro Bridge

The Golden Horn Metro Bridge is a 936 m (3,071 ft.) long cable-stayed bridge which spans the Golden Horn waterway in Istanbul, Turkey. Portions of the bridge deck rotate in order to permit large shipping vessels through the waterway. The rotating bridge deck segments were fabricated off-site and floated in on a barge.

Bridges

Filter Products

Power Gen Solutions

Applications

In 2014, the Atlanta Falcons broke ground on a $1.4 billion new stadium in downtown Atlanta. Set to complete in 2017, the 30-story structure will contain roughly 20,000 tons of structural steel, a retractable roof and a 360-degree halo video board that will span five stories inside the stadium.

Constructed in 1951, the John Greenleaf Whittier Bridge is currently in the process of being replaced by a new bridge compliant with current safety standards. The high traffic bridge connects Newburyport and Amesbury via I-95 over the Merrimack River.

Machinery Movers needed to know the exact weight of a transformer before it was shipped from New Zealand to India. A load in excess of the port&rsquo;s 110 ton maximum lifting capacity would require a special ship to be brought in which would incur significant freight costs.

No one would call the temporary bridge that was constructed in 2002 over the Fore River between Quincy and Weymouth, Mass., a work of art. The bridge replaced a 1936 Art Deco gem when it could no longer safely carry the 32,000 cars that cross the river each weekday.

Leading North African international logistics company, Marine Maroc, has used its new Enerpac SL400 gantry to install high pressure heaters weighing 130 tons at the 2×693 MW Safi coal-fired power plant located close to the city of Safi in Southwest Morocco.

Underground coal extraction led to the erosion of the ground causing a nearby apartment building to tilt. The apartment's foundation needed to be lifted 61 cm in order to re-level the sinking apartment building.

The offshore highway is of a multi span bridge structure located in the open sea 100m to 200m from the shoreline. Each bridge pier consists of various concrete components, one of which will be a reinforced concrete, gravity base, which is placed on the seabed.

The extension of Runway B at Narita Airport required the creation of a new grade-separated intersection between the Higashi-Kanto Expressway and the extended section of Runway B.

Numerous joints need to be bolted together during the erection and disassembly of a tower crane. The stability of the tower crane is dependent on the integrity of its bolted sections. The precise application of torque is critical to ensure the tower crane&rsquo;s stability.

Machinery Movers needed to know the exact weight of a transformer before it was shipped from New Zealand to India. A load in excess of the port’s 110 ton maximum lifting capacity would require a special ship to be brought in which would incur significant freight costs.

Numerous joints need to be bolted together during the erection and disassembly of a tower crane. The stability of the tower crane is dependent on the integrity of its bolted sections. The precise application of torque is critical to ensure the tower crane’s stability.