Enerpac Logo

SHS45540AW, Sistema SyncHoist, 4 cinlindros, 240 Capacidad de tonelada, 39 pulg Carrera, Sistema de control automático, 400 VAC, 50 Hz

SHS45540AW
  1. SHS45540AW
  2. SHS45540AW

SHS45540AW, Sistema SyncHoist, 4 cinlindros, 240 Capacidad de tonelada, 39 pulg Carrera, Sistema de control automático, 400 VAC, 50 Hz

The SHS-Series SyncHoist system is a below-the-hook sling adjuster (hydraulic turnbuckle) which is typically comprised of multiple specialized hydraulic cylinder and valve combinations mounted directly in-line with the rigging which provides an operator the freedom to precisely monitor and adjust each lifting point independently. The use of integrated cylinder stroke sensors and pressure transducers at each lifting point allow for position and load feedback at the operator control station. PLC controls deliver operator safety while the intelligent hydraulics monitor and guide the compact hydraulic cylinders.

Accurate hoisting and load positioning enhance the capability of a single crane. With the use of a single crane, the load can be precisely maneuvered in a vertical and horizontal plane. Utilizing a single crane reduces risk and cost, and vastly improves operating speed and worker safety. A single crane also reduces the risk of damage from oscillations of wire rope due to sudden crane starts/stops.

The synchronous hoist system can be used for pre-programmed positioning, tilting, aligning and high precision horizontal and vertical load positioning.

Modelo: SHS45540AW   |   Serie: SHS   |  Línea de Producto: Herramientas Industriales

The SHS-Series SyncHoist system is a below-the-hook sling adjuster (hydraulic turnbuckle) which is typically comprised of multiple specialized hydraulic cylinder and valve combinations mounted directly in-line with the rigging which provides an operator the freedom to precisely monitor and adjust each lifting point independently. The use of integrated cylinder stroke sensors and pressure transducers at each lifting point allow for position and load feedback at the operator control station. PLC controls deliver operator safety while the intelligent hydraulics monitor and guide the compact hydraulic cylinders.

Accurate hoisting and load positioning enhance the capability of a single crane. With the use of a single crane, the load can be precisely maneuvered in a vertical and horizontal plane. Utilizing a single crane reduces risk and cost, and vastly improves operating speed and worker safety. A single crane also reduces the risk of damage from oscillations of wire rope due to sudden crane starts/stops.

The synchronous hoist system can be used for pre-programmed positioning, tilting, aligning and high precision horizontal and vertical load positioning.

  • Manejo vertical y horizontal de carga con alta precisión - con el uso de una grúa
  • Reduce el riesgo de daños producto de oscilaciones de los cables debido a los movimientos intermitentes y paradas/arranques súbitos de la grúa
  • Mejora considerablemente la seguridad, la rapidez de la operación y el control del operador
  • Las condiciones climatológicas juegan un papel menos crucial
  • El sistema hidráulico controlado con PLC convierte una elevación en un sistema de elevación y posicionamiento de carga de alta precisión
  • Cilindros de compresión/tensión de doble acción con válvulas de retención de la carga que brindan seguridad adicional en caso de rotura de la manguera o daño del acoplador
  • Menor costo en comparación con métodos convencionales de posicionamiento de carga
Opciones para manejo y control del sistema:
  • Control manual: funciones de advertencia del sistema
  • Control automático: sistema completamente monitoreado mediante PLC con funciones programables, que usa pantalla táctil y funciones de advertencias del sistema