Enerpac Logo
Connexion
Panier

SHS48540AW, Positionnement de charge SyncHoist, 4 Cylindres, 833 kN Capacité, 1000 mm Course, Système de contrôle automatique, 400 Vca, 50 Hz

SHS48540AW
  1. SHS48540AW
  2. SHS48540AW

SHS48540AW, Positionnement de charge SyncHoist, 4 Cylindres, 833 kN Capacité, 1000 mm Course, Système de contrôle automatique, 400 Vca, 50 Hz

The SHS-Series SyncHoist system is a below-the-hook sling adjuster (hydraulic turnbuckle) which is typically comprised of multiple specialized hydraulic cylinder and valve combinations mounted directly in-line with the rigging which provides an operator the freedom to precisely monitor and adjust each lifting point independently. The use of integrated cylinder stroke sensors and pressure transducers at each lifting point allow for position and load feedback at the operator control station. PLC controls deliver operator safety while the intelligent hydraulics monitor and guide the compact hydraulic cylinders.

Accurate hoisting and load positioning enhance the capability of a single crane. With the use of a single crane, the load can be precisely maneuvered in a vertical and horizontal plane. Utilizing a single crane reduces risk and cost, and vastly improves operating speed and worker safety. A single crane also reduces the risk of damage from oscillations of wire rope due to sudden crane starts/stops.

The synchronous hoist system can be used for pre-programmed positioning, tilting, aligning and high precision horizontal and vertical load positioning.

Modèle: SHS48540AW   |   Série: SHS   |  Gamme de Produits: Outillages Industriels

The SHS-Series SyncHoist system is a below-the-hook sling adjuster (hydraulic turnbuckle) which is typically comprised of multiple specialized hydraulic cylinder and valve combinations mounted directly in-line with the rigging which provides an operator the freedom to precisely monitor and adjust each lifting point independently. The use of integrated cylinder stroke sensors and pressure transducers at each lifting point allow for position and load feedback at the operator control station. PLC controls deliver operator safety while the intelligent hydraulics monitor and guide the compact hydraulic cylinders.

Accurate hoisting and load positioning enhance the capability of a single crane. With the use of a single crane, the load can be precisely maneuvered in a vertical and horizontal plane. Utilizing a single crane reduces risk and cost, and vastly improves operating speed and worker safety. A single crane also reduces the risk of damage from oscillations of wire rope due to sudden crane starts/stops.

The synchronous hoist system can be used for pre-programmed positioning, tilting, aligning and high precision horizontal and vertical load positioning.

  • Manœuvre verticale et horizontale de la charge avec une grande précision à l'aide d'une seule grue
  • Réduit le risque de dommages causés par les oscillations du câble métallique en raison du démarrage ou de l'arrêt soudain de la grue
  • Importante amélioration de la sécurité des travailleurs, de la vitesse de fonctionnement et du contrôle
  • L'influence des conditions atmosphériques est moins grande
  • Le circuit hydraulique commandé par automate transforme une opération de levage en un système de hissage et de positionnement de la charge
  • Vérins double effet de poussée-traction avec soupapes de maintien de charge pour une sécurité accrue en cas de rupture de flexible ou de détérioration de raccord
  • Coûts réduits par rapport aux modes de positionnement de charge traditionnels Options de gestion et de contrôle du système :
  • Commande manuelle : fonctions d’avertissement du système
  • Commande automatique : système totalement automatisé avec fonctions programmables par écran tactile et fonctions d'avertissement du système.