SHAS422540WE, Positionnement de charge SyncHoist, 4 Cylindres, 4 x 2204 kN Capacité, 1000 mm Course, Système de contrôle sans fil, 460-480 Vca, 60 Hz
SHAS422540WE, Positionnement de charge SyncHoist, 4 Cylindres, 4 x 2204 kN Capacité, 1000 mm Course, Système de contrôle sans fil, 460-480 Vca, 60 Hz
The SHAS-Series Synchronous Hoist System is a below-the-hook sling adjuster (hydraulic turnbuckle) comprised of multiple self-contained, PLC-controlled hydraulic lifting devices. The system enables a single crane to precisely position heavy and unbalanced loads. Each of the lifting devices includes a double-acting hydraulic push pull cylinder with an integrated pump and controls. Integrating the pump eliminates the need for an external power pack and hydraulic hoses.
The wireless remote control ensures a single operator is able to control the SyncHoist while remaining at a safe distance. The operator has full control over load handling; each cylinder can lift or lower independently. The system can perform several types of movements including synchronous lifting and lowering, balancing, and tilting, all of which can be pre-programmed.
The SHAS-Series Synchronous Hoist System is a below-the-hook sling adjuster (hydraulic turnbuckle) comprised of multiple self-contained, PLC-controlled hydraulic lifting devices. The system enables a single crane to precisely position heavy and unbalanced loads. Each of the lifting devices includes a double-acting hydraulic push pull cylinder with an integrated pump and controls. Integrating the pump eliminates the need for an external power pack and hydraulic hoses.
The wireless remote control ensures a single operator is able to control the SyncHoist while remaining at a safe distance. The operator has full control over load handling; each cylinder can lift or lower independently. The system can perform several types of movements including synchronous lifting and lowering, balancing, and tilting, all of which can be pre-programmed.
- Manœuvre verticale et horizontale de la charge avec une grande précision à l'aide d'une seule grue
- Réduit le risque de dommages causés par les oscillations du câble métallique en raison du démarrage ou de l'arrêt soudain de la grue
- Importante amélioration de la sécurité des travailleurs, de la vitesse de fonctionnement et du contrôle
- L'influence des conditions atmosphériques est moins grande
- Le circuit hydraulique commandé par automate transforme une opération de levage en un système de hissage et de positionnement de la charge
- Vérins double effet de poussée-traction avec soupapes de maintien de charge pour une sécurité accrue en cas de rupture de flexible ou de détérioration de raccord
- Coûts réduits par rapport aux modes de positionnement de charge traditionnels Options de gestion et de contrôle du système :
- Commande manuelle : fonctions d’avertissement du système
- Commande automatique : système totalement automatisé avec fonctions programmables par écran tactile et fonctions d'avertissement du système.